|
Contact information | Product Introduction |
Sales: Eileen Email: eileen @ piperepair.cnSkype: eileengogo7 @ outlook.comWhatsapp: +86 18710743935Tel: +86 18710743935QQ: 690089213 | Emergency pipe repair bandage is a fast curing tape composed of a flexible fiberglass mesh impregnated with water activated polyurethane resin.
|
Screen Repair Tape Fast Fix Tape Fiberglass Wrap Bandage 4inch
Widely Used Fast Repair Fiber Glass Fix Wrap
Material | Fiberglass wrap infused with water-activated polyurethane resin |
Color | White Black Green Red Yellow or Customization |
Usage | Pipe repair |
Width | 5cm,7.5cm,10cm,12.5cm,15cm |
Length | 360cm, 460cm |
OEM service | Welcome |
Characteristics | 1)Resists cold and hot temperatures |
2)Easy to apply, no mixing or messy clean up | |
3)Resistant to water, acid, salts, or soil organics | |
4) Can be applied underwater or to wet surfaces | |
5) Minimal surface preparation required | |
6)Quick, long term protective coating, ready for immediate service | |
7) Contains no solvents |
Details Images
Industrial Strength Pipe Repair Bandage Water Activated Fiberglass Tape
Pipe Repair Kit
Industrial Strength Pipe Repair Bandage Water Activated Fiberglass Tape
Specifications
Name | Model | Size | Packing |
Pipe Wrap Bandage | PR002 | 5cm x 3.6m (2” x 12”) | 10rolls x 10rolls/ctn |
PR003 | 75cm x 3.6m (3” x 12”) | ||
PR004 | 100cm x 3.6m (4” x 12”) | ||
PR005 | 125cm x 3.6m (5” x 12”) | ||
PR006 | 150cm x 3.6m(6” x 12”) |
Industrial Strength Pipe Repair Bandage Water Activated Fiberglass Tape
Technical Data
♦ Useable life: …2-3 minutes, depends on temperature of water and
pipework
♦ Intial cure time: … 5 minutes
♦ Full cure time: … 30minutes
♦ Shore D hardness: … 70
♦ Tensile strength: … 30-35Mpa
♦ Tensile modulus: … 7.5Gpa
♦ Maximum service temperature: … 150℃
♦ Pressure resistance: … 450psi (Min wrapping 12 layers around
cracked/leaking area)
Industrial Strength Pipe Repair Bandage Water Activated Fiberglass
Tape
Application Instructions
1. Shut down pipe, wear disposable gloves to protect the hands.
2. Soak bandage in water for about five seconds.
3. Apply tape around the damaged areas, extending 50mm on either side of the leak, building to a minimum thickness of 10mm for the best result.
4. Continue to apply pressure by hand moulding and squeezing the layers together in a tightening motion.
5. Allow a minimum of 30 minutes for tape to set rock-hard.
Packaging and Delivery
Industrial Strength Pipe Repair Bandage Water Activated Fiberglass Tape
Factory and Exhibition
![]() | About us Ansen Medical technology Development Co,.Ltd, as a professional manufacturer and exporter ,devoted in scientific research and exploitation of orthopedic disposable products. At present ,with the cooperation with LAb Equipemnt &Reagentsgonts of America,the scientific research laboratory was set up which would continually engage in the development of product exploitation. |
![]() | Sales: Eileen Email: eileen @ piperepair.cnSkype: eileengogo7 @ outlook.comWhatsapp: +86 18710743935Tel: +86 18710743935QQ: 690089213 |
![]() |
5cm 7.5cm 10cm 12.5cm 15cm Ansen colors easy operate oil & gas resistant synthetic armor wrapping tape fiberglass Images |